TF230-S - Belimo Spring-return Damper Actuator 2 Nm, < 75 s, 95° AC 230 V, Open/Close, 1 x SPDT IP 42

Find all parts for your ventilation system at iacs, the Free Delivery and 1-2 Delivery is available for all the Belimo Actuators in stock

The Belimo TF230-S is a type of Actuator used in HVAC and ventilation systems.

The force applied by the Torque of the TF230-S is 2 Nm.

The power supply requested for this Rotary Actuator is 230Vac.

If you have questions concerning size or installation, refer to the Belimo custom datasheet above or email iacs for individualised support.

TF230-S - Spring-return actuator 2 Nm, < 75 s, 95° AC 230 V, Open/Close, 1 x SPDT IP 42, 

•    Running time spring < 25 s
•    Control Open/Close with single-wire contact
•    Connection PVC cable 1m
•    Auxiliary switch 0...100 % adjustable
•    Rating 1 mA...3(0.5)A, AC 250 V
•    Spindle driver universal spindle clamp
•    Direction of rotation reversible (right/left)
•    Angle of rotation limit. mechanical integral

Features
 

• Mode of operation  The actuator moves the damper to its normal working position while tensioning the return spring at the same time. If the power supply is interrupted, the energy stored in the spring moves the damper back to its safe position.

• Simple direct mounting Simple direct mounting on the damper spindle with a universal spindle clamp. An antirotation device is supplied to prevent unwanted rotation of the whole unit.


• High functional reliability The actuator is overload-proof, requires no limit switches and automatically stops when the end stop is reached.


• Flexible signalization Flexible signalization with adjustable auxiliary switch (0 ... 100% )

•    Electrical data Nominal voltage AC 100 ... 240 V, 50/60 Hz 
•    Nominal voltage range AC 85 ... 265 V
•    Power consumption In operation 2.5 W @ nominal torque At rest 1.5 W For wire sizing  5VA
•    Auxiliary switch 1 x SPDT 3 (0.5) A, AC 250 V (Switching point adjustable 0 ... 100% <) )
•    Connection Motor Cable 1 m, 2 x 0.75 mm2 Auxiliary switch Cable 1 m, 3 x 0.75 mm2
•    Functional data Torque Motor Min. 2 Nm @ nominal voltageSpring return Min. 2 Nm
•    Direction of rotation Selected by mounting L / R
•    Angle of rotation Max. 95°<)  (adjustable 37 ... 100%<) with built-in mechanical stop)
•    Running time Motor < 75 s (0 ... 2 Nm) Spring return < 25 s @ –20 ... 50°C / max. 60s @ –30°C 
•    Sound power level Moto Max. 50 dB (A) Spring return Approx. 62 dB (A)
•    Service life Min. 60’000 operations
•    Position indication Mechanical
•    Safety Protection class II Totally insulated 
•    Degree of protection IP42 in any mounting position 
•    EMC CE according to 89/336/EEC Low voltage directive CE according to 73/23/EEC  
•    Mode of operation Type 1.AA (to EN 60730-1)
•    Overvoltage category III
•    Control pollution degree 3
•    Ambient temperature range –30 ... +50°C
•    Non-operating temperature –40 ... +80°C
•    Ambient humidity range 95% r.H., non-condensating (EN 60730-1)
•    Maintenance Maintenance-free
•    Dimensions / Weight Dimensions See «Dimensions» on page 2
•    MWeight Approx. 650 g