GBB166.1E - Siemens rotary damper actuator AC 24V, DC 010V, 25 N/m with 2 auxillary switches and DC 010V feedback, 150s.

Deliveries take between 5 and 7 working days for all of the Siemens Actuators that IACS has on hand.

The Siemens GBB166.1E is an Actuator utilised in HVAC and air ventilation applications to handle dampers.

The force applied by the Torque of the GBB166.1E is 30 Nm.

This damper Actuator needs to be supported by a Power Supply of 24Vac/Vdc.

IACS offers the most economical Siemens Actuators for your system.

Refer to the Siemens custom datasheet above or email IACS for tailored support if you have any issues about size or installation.

GBB Actuators

Electronic motor driven actuators for three-position and modulating control, nominal torque 25 Nm (GBB) or 35 Nm (GIB), self-centering shaft adapter, mechanically adjustable span between 0...90°, pre-wired with 0.9 m long connection cables. Type-specific variations with adjustable offset and span for the positioning signal, position indicator, feedback potentiometer and adjustable auxiliary switches for supplementary functions. This data sheet provides a brief overview of these actuators. Please refer to the Technical Basics in document Z4626en for a detailed description as well as information on safety, engineering notes, mounting and commissioning.

For damper areas up to 4 m2

(GBB) or 6 m2
(GIB), friction-dependent
· Suitable for modulating controllers (DC 0...10 V) or three-position controllers (e.g. for
outside air dampers).
· For dampers having two actuators on the same damper shaft (tandem-mounted
actuators or powerpack).
· It is recommended to switch off the power during two-position control when the
actuator has reached the open or close position, in order to enhance life span and
reduce power consumption.