GBB163.1E - Siemens rotary damper actuator AC 24V, DC 010V, 25 N/m with DC 010V feedback and offset and span adjustment, 150s.

The delivery time for all of the Siemens Actuators on hand at IACS is 5 to 7 working days.

The Siemens GBB163.1E is an Actuator used in air ventilation and HVAC applications to open and close dampers.

The Torque used by the GBB163.1E is 30 Nm.

This Siemens Actuator requests a Power Supply of 24Vac/Vdc.

IACS has the most affordable Siemens Actuator that works with your system.

Consult the Siemens custom datasheet above or contact IACS via email for personalised assistance if you have queries about size or installation.

GBB Actuators

Electronic motor driven actuators for three-position and modulating control, nominal torque 25 Nm (GBB) or 35 Nm (GIB), self-centering shaft adapter, mechanically adjustable span between 0...90°, pre-wired with 0.9 m long connection cables. Type-specific variations with adjustable offset and span for the positioning signal, position indicator, feedback potentiometer and adjustable auxiliary switches for supplementary functions. This data sheet provides a brief overview of these actuators. Please refer to the Technical Basics in document Z4626en for a detailed description as well as information on safety, engineering notes, mounting and commissioning.

For damper areas up to 4 m2

(GBB) or 6 m2
(GIB), friction-dependent
· Suitable for modulating controllers (DC 0...10 V) or three-position controllers (e.g. for
outside air dampers).
· For dampers having two actuators on the same damper shaft (tandem-mounted
actuators or powerpack).
· It is recommended to switch off the power during two-position control when the
actuator has reached the open or close position, in order to enhance life span and
reduce power consumption.