AVK24A-SR-TPC SuperCap Globe Valve Actuator, AC/DC 24 V, 150 s - Belimo | ideal for globe valves

For all of the Belimo Actuators that are in stock at iacs, we offer Free Delivery and Next 1-2 Day Delivery.

The Belimo AVK24A-SR-TPCis a type of Actuator used to open valves in HVAC systems and applications.

The Torque used by the AVK24A-SR-TPC is 2000 N.

This Belimo Actuator requests a power supply of 24Vac/Vdc.

This Belimo part is suitable for Globe Valves.

If you have questions concerning size or installation, refer to the Belimo custom datasheet above or email iacs for individualised support.

AVK24A-SR-TPC SuperCap Globe Valve Actuator, AC/DC 24 V, 150 s

• 2000 N, 32 mm
• AC/DC 24 V, modulating
• Operating range DC (0) 2...10 V
• Position feedback DC (0) 2...10 V
• Actuating time motor 150 s / 32 mm
• IP 54, Manual override temporary
• Connection Terminal with cable PVC 1 m
• Stroke direction / closing point selectable (top/bottom)
• Power-Off-Position adjustable

Principle of operation: The actuator is connected with a standard modulating signal of DC 0...10 V and moves to the position defined by the positioning signal at the same time as the integrated capacitors are loaded. Interrupting the supply voltage causes the valve to be moved to the selected emergency setting position (POP) by means of stored electrical energy.

Pre-charging time (start up): The capacitor actuators require a pre-charging time. This time is used for charging the capacitors up to a usable voltage level. This ensures that, in the event of an electricity interruption, the actuator can move at any time from its current position into the preset emergency setting position (POP). The duration of the pre-charging time depends mainly on how long the power was interrupted.

Delivery condition (capacitors): The actuator is completely discharged after delivery from the factory, which is why the actuator requires approximately 20 s pre-charging time before initial commissioning in order to bring the capacitors up to the required voltage level.

Simple direct mounting: Simple direct mounting on the globe valve by means of form-fit hollow clamping jaws. The actuator can be rotated by 360° on the valve neck.

Manual override: Manual control with push-button possible - temporary. The gear is disengaged and the actuator decoupled for as long as the button is pressed. The stroke can be adjusted by using a hexagon socket screw key (5 mm), which is inserted into the top of the actuator. The stroke spindle extends when the key is rotated clockwise.

High functional reliability: The actuator is overload protected, requires no limit switches and automatically stops when the end stop is reached.

Combination valve/actuator: Refer to the valve documentation for suitable valves, their permitted medium temperatures and closing pressures.

Position indication: The stroke is indicated mechanically on the bracket with tabs. The stroke range adjusts itself automatically during operation.

Home position: Factory setting: Actuator spindle is retracted. When valve-actuator combinations are shipped, the direction of motion is set in accordance with the closing point of the valve. The first time the supply voltage is switched on, i.e. at the time of commissioning, the actuator carries out an adaption, which is when the operating range and position feedback adjust themselves to the mechanical setting range. The actuator then moves into the position defined by the positioning signal.

Direction of rotation switch: When actuated, the direction of stroke switch changes the running direction in normal operation. The direction of stroke switch has no influence on the emergency setting position (POP) which has been set.

Adaption and synchronisation: An adaption can be triggered manually by pressing the „Adaption“ button. Both mechanical end stops are detected during the adaption (entire setting range). The actuator then moves into the position defined by the positioning signal.

Emergency setting position (POP) rotary knob: The «Emergency setting position» rotary knob can be used to adjust the desired emergency setting position (POP). In the event of an electricity interruption, the actuator will move into the selected emergency setting position, taking into account the bridging time (PF) of 2 s which was set ex-works.

Electrical data:

• Nominal voltage AC/DC 24 V
• Nominal voltage frequency 50/60 Hz
• Nominal voltage range AC 19.2...28.8 V / DC 21.6...28.8 V
• Power consumption in operation 5 W
• Power consumption in rest position 2 W
• Power consumption for wire sizing 9.5 VA
• Connection supply / control Terminals with cable 1 m, 4 x 0.75 mm² (Terminal 4 mm²
• Parallel operation Yes (note the performance data)

Functional data:

• Actuating force motor 2000 N
• Positioning signal Y DC 0...10 V
• Positioning signal Y note Input impedance 100 kΩ 
• Operating range Y DC 2...10 V
• Position feedback U DC 2...10 V
• Position feedback U note Max. 0.5 mA
• Emergency setting position Actuator spindle 0...100%, adjustable (POP rotary button)
• Position accuracy 5% absolute
• Manual override Gear disengagement with push-button
• Nominal stroke 32 mm
• Actuating time 150 s / 32 mm
• Actuating time emergency control function 35 s / 32 mm
• Adaption setting range manual (automatic on first power-up)
• Sound power level motor 60 dB(A)
• Sound power level emergency control position 60 dB(A)
• Position indication Mechanically, 5...32 mm stroke

Safety:

• Protection class IEC/EN III Safety extra-low voltage
• Degree of protection IEC/EN IP54
• EMC CE according to 2004/108/EC
• Certification IEC/EN IEC/EN 60730-1 and IEC/EN 60730-2-14
• Mode of operation Type 1.AA
• Rated impulse voltage supply / control 0.8 kV
• Control pollution degree 3
• Ambient temperature 0...50°C
• Non-operating temperature -40...80°C
• Ambient humidity 95% r.h., non-condensing
• Maintenance Maintenance-free

Weight: - 4.5 kg

Terms:

Abbreviations POP = Power off position / emergency setting position, CPO = Controlled power off / controlled emergency control function, PF = Power fail delay time / bridging time