AVK230A-3-RE Supercap Globe Valve Actuator Retrofit, AC 230 V, 150 s - Belimo | ideal for globe valves

For all of the Belimo Actuators that are in stock at iacs, we offer Free Delivery and Next 1-2 Day Delivery.

The Belimo AVK230A-3-REis a type of Actuator used to open valves in HVAC systems and applications.

The Torque used by the AVK230A-3-RE is 2000 N.

This Belimo Actuator requests a power supply of 230Vac.

This Belimo component can be used with Globe Valves.

IACS has the best prices on the right Belimo Actuators for your system.

Consult the Belimo custom datasheet above or contact iacs via email for personalised assistance if you have queries about size or installation.

AVK230A-3-RE Supercap Globe Valve Actuator Retrofit, AC 230 V, 150 s

• 2000 N, 32 mm
• AC 230 V, 3-point
• Actuating time motor 150 s / 32 mm
• Actuating time emergency setting position (POP) 35 s / 32 mm
• Power-Off position adjustable
• IP54, manual override temporary
• Universal valve adapter enclosed
• Connection cable PVC 1 m

Mode of operation: The actuator moves the valve to the desired operating position at the same time as the integrated capacitors are loaded. Interrupting the supply voltage causes the valve to be moved to the selected emergency setting position (POP) by means of stored electrical energy.

Pre-charging time (start up): The capacitor actuators require a pre-charging time. This time is used for charging the capacitors up to a usable voltage level. This ensures that, in the event of an electricity interruption, the actuator can move at any time from its current position into the preset emergency setting position (POP). The duration of the pre-charging time depends mainly on how long the power was interrupted.

Delivery condition (capacitors): The actuator is completely discharged after delivery from the factory, which is why the actuator requires approximately 20 s pre-charging time before initial commissioning in order to bring the capacitors up to the required voltage level.

Installation on third-party valves: The retrofit actuators for installation on a wide range of valves from various manufacturers are comprised of an actuator, universal valve neck adapter and universal valve stem adapter. Adapt the valve neck and valve stem to begin with, thenattach the retrofit actuator to the valve neck adapter, connect to the valve and start up. The valve neck adapter/actuator can be rotated through 360° on the valve neck,
provided it is permitted by the size of the installed valve.

Installation on BELIMO valves: Please use standard actuators from Belimo for installation on Belimo globe valves. The installation of retrofit actuators on Belimo globe valves is technically possible.

Manual override: Manual control with push-button possible - temporary. The gear is disengaged and the actuator decoupled for as long as the button is pressed. The stroke can be adjusted by using a hexagon socket screw key (5 mm), which is inserted into the top of the actuator. The stroke spindle extends when the key is rotated clockwise.

High functional reliability The actuator is overload protected, requires no limit switches and automatically stops when the end stop is reached.

Position indication The stroke is indicated mechanically on the bracket with tabs. The stroke range adjusts itself automatically during operation.

Electrical data:

• Nominal voltage AC 230 V
• Nominal voltage frequency 50/60 Hz
• Nominal voltage range AC 85...265 V
• Power consumption in operation 3.5 W
• Power consumption in rest position 1.5 W
• Power consumption for wire sizing 6.5 VA
• Connection supply / control Cable 1 m, 4 x 0.75 mm²
• Parallel operation Yes (note the performance data)

Functional data:

• Actuating force 2000 N
• Setting emergency position (POP) Actuator spindle retracted / extended, adjustable (POP rotary button)
• Manual override Gear disengagement with push-button
• Nominal stroke 32 mm
• Actuating time 150 s / 32 mm
• Actuating time emergency control function 35 s / 32 mm
• Sound power level motor max. 60 dB(A)
• Sound power level emergency setting position max. 60 dB(A)
• Position indication Mechanically, 5...32 mm stroke

Safety:

• Protection class IEC/EN II Protective insulated
• Degree of protection IEC/EN IP54
• EMC CE according to 2004/108/EC
• Low voltage directive CE according to 2006/95/EC
• Certification IEC/EN IEC/EN 60730-1 and IEC/EN 60730-2-14
• Mode of operation Type 1.AA
• Rated impulse voltage supply / control 4 kV
• Control pollution degree 3
• Ambient temperature 0...50°C
• Non-operating temperature -40...80°C
• Ambient humidity 95% r.h., non-condensing
• Maintenance Maintenance-free

Weight: 7.6 Kg

Terms: 

Abbreviations POP = Power off position / emergency setting position, CPO = Controlled power off / controlled, emergency control function, PF = Power fail delay time / bridging time