What Our Customers Are Saying
SKU
R6032R-B3
R6032R-B3 - Belimo 2-way Open/Close Ball Valve, DN 32, Flange, PN 6, KVS 32
£291.48
£242.90
On request
Next Supplier Stock Update: 18/04/2026
Manuals & Datasheets
| DATA-SHEET |
 |
| Product type | Water Valve |
| Manufacturer | Belimo |
| Flow pattern | 2-Way |
| Valve type | Ball Valve |
| Valve connection | Flanged |
| Pressure | PN 6 |
| DN (mm) | DN 32 |
| Flow rate - m³/h | 32 kvs |
R6032R-B3 - Belimo 2-way Open/Close Ball Valve, DN 32, Flange, PN 6, KVS 32
• Housing nickel-plated, hot-pressed brass
• Valve disk nickel-plated brass
• Seal PTFE / EPDM O-ring
• Temperature of medium max. 100 °C
• Leakage rate A-AB air bubble-tight EN 12266
Features
- Mode of operation The characterized control valve is operated by a rotary actuator. The actuator is controlled by a standard modulating or 3-point control system and moves the ball of the valve – the throttling device – to the opening position dictated by the control signal. Open the ball valve counterclockwise and close it clockwise.
• Functional data Flow media Cold and hot water, water with max. 50% volume of glycol
• Temperature of medium +5°C ... +110°C1) (lower or higher temperatures on request)
• Flow characteristic Control path A – AB: equal percentage (to VDI/VDE 2173) n(gl): see «Type overview»
• Rangeability Sv See «Type overview»
• Leakage rate Air bubble-tight (BO 1, DIN3230 T3)
• Pipe connector Flange PN 6 (to EN 1092/1)
• Differential pressure Δpvmax 100 kPa, Closing pressure Δps 600 kPa
• Angle of rotation 90°<) (Operating range 15 ... 90°<)
• Installation position Upright to horizontal (in relation to the stem)
• Maintenance Maintenance-free
• Materials Fitting Forged, nickel-plated brass body
• Valve cone and stem Chrome-plated brass
• Stem seal O-Ring, EPDM
• Ball seat PTFE, O-Ring Viton
• Flange ring DN 15 / 20: Zinc-plated steel DN 25 ... 80: Aluminum
• Flange joint surface Nickel-plated brass
• Dimensions / Weights see «Dimensions and weights», page 3
• Motorizing see the complete overview of water solutions
• 1)The allowed media temperature can be limited, depending on the type of actuator. The correct values can be found in the corresponding actuator data sheets.
