NR230A-S - Belimo Rotary actuator for control BV 10 Nm | ideal for ball valves

Find all the components for your ventilation system at IACS. All Belimo Actuators on hand are eligible for Free Delivery and 1-2 Delivery.

The Belimo NR230A-S is a kind of Actuator used in HVAC applications and air ventilation systems.

To control the damper, this kind of Actuator turns it by Rotary motion.

The Torque used by the NR230A-S is 10 Nm.

This Belimo Actuator requests a power supply of 230Vac.

Find at IACS the ideal Belimo Actuator compatible with your system at the best price.

If you are unsure about size or installation, refer to the Belimo custom datasheet above or message iacs to receive special instructions and a custom quote.

NR230A-S - Rotary actuator for control BV 10 Nm

•    AC 230 V, Open/Close, 3-point, 1 x SPDT
•    Running time motor 90 s / 90°
•    IP 54, Manual override temporary, permanent
•    Connection cable length = 1 m
•    Position indicator mechanical

Features
 

• Simple direct mounting Straightforward direct mounting on the ball valve with only one screw. The assembly tool is integrated in the plug-on position indicator. The mounting position in relation to the ball valve can be selected in 90° steps.


• Manual override Manual override with push-button possible (the gear is disengaged for as long as the button is pressed or remains locked).


• Adjustable angle of rotation Adjustable angle of rotation with mechanical end stops.


• High functional reliability The actuator is overload-proof, requires no limit switches and automatically stops when theend stop is reached.


• Flexible signalization Flexible signalization with adjustable auxiliary switch (0 ... 100%).

•     Electrical data Nominal voltage AC 100 ... 240 V, 50/60 Hz 
•     Nominal voltage range AC 85 ... 265 V
•     Power consumption In operation 2.5 W @ nominal torque
•     At rest 0.6 W
•     For wire sizing 5.5 VA
•     Auxiliary switch1 x SPDT, 1 mA ... 3 (0.5) A, AC 250 V II(0 ... 100% adjustable)
•     Connection Motor Cable 1 m, 3 x 0.75 mm² Auxiliary switch Cable 1 m, 3 x 0.75 mm^{2
•     Parallel connectionPossible, note performance data}
•     Functional dataTorque (nominal torque)Min. 10 Nm @ nominal voltage
•     Manual overrideGearing latch disengaged with pushbutton, can be locked
•     Running time150 s / 90°<
•     Sound power levelMax. 35 dB (A) (without the valve)
•     Position indication Mechanical, pluggable
•     Safety Protection classII totally insulated
•     Degree of protectionIP54 in any mounting position NEMA 2, UL Enclosure Type 2
•     EMC CE according to 2004/108/EC Low-voltage directive CE according to 2006/95/EC
•    Certification cULus according to UL 60730-1A and UL 60730-2-14and CAN/CSA E60730-1:02Certified to IEC/EN 60730-1 and IEC/EN 60730-2-14
•     Mode of operationType 1
•     Rated impulse voltage 2.5 kV
•     Control Pollution Degree3 
•     Ambient temperature range–0 ... +50°C
•     Media temperature +5 ... +110°C in (control) ball valve–10°C  with stem heating upon request
•     Non-operating temperature–40 ... +80°C 
•    Maintenance Maintenance-free
•    Dimensions / WeightDimensionsSee «Dimensions» on page3
•    WeightApprox. 800 g