IO-RM-3 - Sontay Three Stage Relay Output Module

The IO-RM3 is intended for use with BMS controllers to convert an analogue control output to a binary, heat/cool, staged or sequenced relay modes. LEDs indicate correct operation and Hand/Off/Auto jumpers ease commissioning. Low current draw from 0- 10Vdc controller output means that the IO-RM2 can work successfully with most BEMS controllers. Features: Link selectable modes binary, heat/cool, staged or sequenced  On/Off/Auto links for ease of commissioning  DIN Rail mounting Benefits: Fault finding LED indication  Relay status LED indication Input signal 0-10Vdc 1mA min. into 22kΩ impedance Output contacts 8A at 230Vac (resistive load) Power supply: 24Vac ±15% @ 50Hz or 24Vdc +15% -6%, 65mA max. Hysteresis ±0.2Vdc about switching points Operating modes: Heat/cool 3 Stage 1 of 3 Sequenced Binary LED indication: Supply OK Supply voltage low Supply voltage high Relay Status Hi input voltage Incorrect input mode jumper selection Low input voltage (only in 2- 10Vdc mode) Manual override On/Off/Auto jumper selectable Electrical terminals Rising cage connectors for 0.5-2.5mm² cables Ambient range: Temperature -10 to +40°C (14 to 107°F) RH 0-80% non-condensing Dimensions (H x W x H) 72 x 64 x 55 (2.83 x 2.52 x 2.17”) Country of origin UK