What Our Customers Are Saying
SKU
FM150F-SZ
FM150F-SZ - Belimo Flow sensor, AC/DC 24 V, DN 150, FS 54.0 l/s
£1,014.72
£845.60
On request
Next Supplier Stock Update: 18/04/2026
Manuals & Datasheets
| DATA-SHEET |
 |
| Product type | Sensors & Stats |
| IP rating | IP54 |
| Output Signal | 0..10Vdc |
| Manufacturer | Belimo |
| Power Supply | 24Vac/Vdc |
| Sensor Type | Flow Volume Sensor |
Find every component of your Air Handling system at IACS. Flow Sensors manufactured by Belimo that are now on hand can all be supplied with either Free or 1-2 Days Delivery.
The Belimo FM150F-SZ is a Sensor that monitors Flows in HVAC applications.
This Sensor is able to utilised in closed systems for both cold and warm water and is resistant to magnetite and dirt.
The ideal Belimo accessories for your system are most affordable at IACS.
If you have questions concerning size or installation, refer to the Belimo custom datasheet above or email IACS for individual ised support.
| Electrical data | Nominal voltage | AC/DC 24 V |
| Nominal voltage frequency | 50/60 Hz | |
| Nominal voltage range | AC 19.2...28.8 V / DC 21.6...28.8 V | |
| Power consumption AC | 1 VA | |
| Power consumption DC | 0.5 W | |
| Connection supply | Cable 1 m, 3 x 0.75 mm² | |
| Functional data | Application | Water |
| Voltage output | 1x 0...10 V, max. load 1 mA | |
| Pipe connection | Flange PN 16 according to EN 1092-2 | |
| Installation position | upright to horizontal | |
| Servicing | maintenance-free | |
| Measuring data | Measured values | Flow |
| Measuring fluid | Water and water glycol mixtures | |
| Measuring principle | Ultrasonic volumetric flow measurement | |
| Measuring accuracy flow | ±2% of the measured value (20...100% FS) @ 20°C / Glycol 0% vol. ±0.4% of FS (0...20% FS) @ 20°C / Glycol 0% vol. |
|
| Measuring accuracy flow note | ±6% of the measured value (20...100% FS) @ -20...120°C / Glycol 0...50% vol. ±1.2% of FS (0...20% FS) @ -20...120°C / Glycol 0...50% vol |
|
| Flow Measurement Repeatability | ±0.5% | |
| Min. flow measurement | 1% of FS | |
| Materials | Flow measuring pipe | EN-GJL-250 (GG 25), with protective paint |
| Safety data | Ambient humidity | Max. 95% RH, non-condensing |
| Ambient temperature | 30...50°C [-22...122°F] | |
| Fluid temperature | -20...120°C [-5...250°F] | |
| Storage temperature | -40...80°C [-40...176°F] | |
| Protection class IEC/EN | III, Safety Extra-Low Voltage (SELV) | |
| Power source UL | Class 2 Supply | |
| Certification IEC/EN | IEC/EN 60730-1:11 and IEC/EN 60730-2-15:10 | |
| Degree of protection IEC/EN | IP54 | |
| Degree of protection NEMA/UL | NEMA 2 | |
| Enclosure | UL Enclosure Type 2 | |
| EMC | CE according to 2014/30/EU | |
| Quality Standard | ISO 9001 | |
| Mode of operation | Type 1 | |
| Pollution degree | 3 | |
| Rated impulse voltage supply | 0.8 kV |
Mode of operation
The ultrasonic flow sensor is equipped with a flow pipe, four flow transmitters and an electronic circuit. A temperature sensor is mounted in the flow pipe to compensate the temperature effects. A sensor error occurs when the ultrasonic path is interrupted (air bubbles in the system, connection to ultrasonic transducers interrupted).
