SKU
FCPM00A02K
FCPM00A02K - Carel Fan speed controller KIT, with 45 Bar pressure transducer and 2 meter Packard connection cable
£442.62
£368.85
On request
Next Supplier Stock Update: 18/04/2026
Manuals & Datasheets
| MANUAL | DATA-SHEET | BROCHURE |
 |
|
|
| Product type | Fan Speed Regulators |
| IP rating | IP54 |
| Manufacturer | Carel |
| Power Supply | 230Vac, 1Ph, 50Hz |
Fan speed controller KIT, with 45 Bar pressure transducer and 2 meter Packard connection cable.
The KIT is made of:
Qty. 1 FCPM082010 - Stand Alone fan speed controller,Power supply: Single phase 230 VacIndex of protection: IP54Frequency: 50/60 HzMaximum output current: 8 A
Qty. 1 SPKT00B6R0 45 Bar Pressure transducer -Power supply: 4.5 to 5.5 Vdc
Type: RatiometricIndex of protection: IP65
Qty. 1 SPKC002310 Packard connector for SPKT pressure transducers Length: 2mIndex of protection: IP67
FCP is a speed controller for single-phase fans on stand-alone units with up to two circuits. It controls the fan speed according to the variation in pressure in the condenser circuit, so as to maintain the set point, via a 0 to 5 V signal from the ratiometric pressure transducer (SPKT*R0) positioned in the water circuit.
This device is used for air-conditioning and refrigeration applications, and is installed directly on the condensing unit, thanks to the case with IP54 index of protection.It can control single-phase electric motors, with a load of up to 8 A/230 Vac.
Available in the Master/Slave or power version (as for the current MCHRTF80A0, in the IP54 version).
The KIT is made of:
Qty. 1 FCPM082010 - Stand Alone fan speed controller,Power supply: Single phase 230 VacIndex of protection: IP54Frequency: 50/60 HzMaximum output current: 8 A
Qty. 1 SPKT00B6R0 45 Bar Pressure transducer -Power supply: 4.5 to 5.5 Vdc
Type: RatiometricIndex of protection: IP65
Qty. 1 SPKC002310 Packard connector for SPKT pressure transducers Length: 2mIndex of protection: IP67
FCP is a speed controller for single-phase fans on stand-alone units with up to two circuits. It controls the fan speed according to the variation in pressure in the condenser circuit, so as to maintain the set point, via a 0 to 5 V signal from the ratiometric pressure transducer (SPKT*R0) positioned in the water circuit.
This device is used for air-conditioning and refrigeration applications, and is installed directly on the condensing unit, thanks to the case with IP54 index of protection.It can control single-phase electric motors, with a load of up to 8 A/230 Vac.
Available in the Master/Slave or power version (as for the current MCHRTF80A0, in the IP54 version).
|
TECHNICAL FEATURES |
|
|
|
|
|
Power Supply |
230 Vac (-15% to +10%), 50/60 Hz with autosensing |
|
Output |
8A max. 0 to 230 Vac |
|
Analog inputs |
ratiometric type 0 to 5 Vdc, 8 mA or NTC |
|
Operating conditions |
-20T50 °C, <85% rH
non-condensing |
|
Storage conditions |
-20T70 °C, <85% rH
non-condensing |
|
Index of protection |
IP54 |