DR230A-R Rotary Actuator, 90 Nm, AC 230 V, 150 s - Belimo | ideal for butterfly valves

At IACS we provide Free Delivery and Next 1-2 day Delivery for all the Belimo Actuators in stock.

The Belimo DR230A-R is an Actuator used in HVAC applications and air ventilation systems.

This type of Actuator applies a Rotary motion to regulate the damper.

The Torque force applied by the DR230A-R is 90 Nm.

The power supply requested for this Rotary Actuator is 230Vac.

If you have questions concerning size or installation, refer to the Belimo custom datasheet above or email iacs for individualised support.

DR230A-R Rotary Actuator, 90 Nm, AC 230 V, 150 s

• IP 54
• Max. torque 90 Nm
• AC 230 V
• Running time 150 s / 90°
• OPEN-CLOSE
• Manual override temporary, permanent
• Connection cable length 1 m
• Retrofit

Application: For butterfly valves with the following mechanical specifications:– ISO 5211: F07 (hole circle diameter on the flange for mounting the fitting), – ISO 5211: quadratic or flat head stem head geometry

Tappet shaft: The form fit adapter is not included in the scope of delivery (see «Accessories»).

Direct mounting: Simple direct mounting on the butterfly valve. The mounting orientation in relation to the butterfly valve can be selected in 90° (angle) increments.

Manual override: Manual override with push-button possible (the gear is disengaged for as long as the button is pressed or remains locked).

High functional reliability: The actuator is overload protected, requires no limit switches and automatically stops when the end stop is reached.

Electrical Data:

• Nominal voltage AC 100...240 V
• Nominal voltage frequency 50/60 Hz
• Nominal voltage range AC 85...265 V
• Power consumption in operation 5 W
• Power consumption in rest position 2 W
• Power consumption for wire sizing 9 VA
• Connection supply / control Cable 1 m, 3 x 0.75 mm²
• Parallel operation No

Functional data:

• Torque motor Max. 90 Nm (not constant)
• Manual override Gear disengagement with push-button, can be
• locked
• Running time motor 150 s / 90°
• Sound power level motor 45 dB(A)
• Position indication Yes

Safety:

• Protection class IEC/EN II Protective insulated
• Degree of protection IEC/EN IP54
• EMC CE according to 2004/108/EC
• Low voltage directive CE according to 2006/95/EC
• Certification IEC/EN IEC/EN 60730-1 and IEC/EN 60730-2-14
• Mode of operation Type 1
• Rated impulse voltage 4 kV
• Control pollution degree 3
• Ambient temperature 0...50°C
• Non-operating temperature -40...80°C
• Ambient humidity 95% r.h., non-condensing
• Maintenance Maintenance-free

Mechanical Data: Connection flange F07

Weight: approx. 3.4 kg