DPWC111000 - Carel Wall mounting Temperature sensor (-10T60 C) (output NTC) and humidity (10 to 90% rH).

£178.39 £148.66

In stock

Only 1 left

Chat with us to find out stock levels

Overview

Manuals & Datasheets

MANUAL	DATA-SHEET	BROCHURE

Product type	Sensors & Stats
IP rating	IP55
Output Signal	0..1 Vdc, 4..20 mA, NTC10k Carel
Manufacturer	Carel
Sensor Type	Temperature and Humidity
Sensor characteristics	Wall Mounted

Description

The Carel DPWC111000 is a Wall mounting sensor used to measure and manage Temperature (-10T60 °C) (output CAREL NTC sensor only) and humidity (10 to 90% rH), selectable output: -0.5 to 1 Vdc/4 to 20 mA

Electronic probes from the CAREL DP series are developed for air-conditioning and air-handling, heating, and refrigeration applications, and are intended to be used in conjunction with CAREL controllers. Rooms, industrial spaces, and ducts all have their own versions. The assembly, the type of output signal, and the models (temperature, humidity, or combined) are all different. Temperature output with resistive NTC is offered on some models.

TECHNICAL SPECIFICATION

Power supply	12 to 24 Vac +/-10% or 8 to 32 Vdc (min-max)
Power input	direct serial version type-max: 5 to 12 mA @ 12 Vdc power supply 4 to 8 mA @ 24 Vdc power supply opto-isolated serial version type-max: 14 to 20mA @ 12 Vdc power supply 9 to 13 mA @ 24 Vdc power supply
Temperature sensor Humidity sensor	NTC 10Kohm at 25 °C 1% Capacitive sensor
Storage	-20T70 °C ; 20 to 90%rh non-condensing
Output signal	RS485 serial Transmission of temperature and humidity measurements with protocol: CAREL Supervisor or Modbus (Tab. 1) Temperature: Range of reference -30.0°C to +70.0°C Humidity: Range of reference 0.0%rh to 99.9%rh
Environmental pollution	normal
Case index of protection	IP55

The CAREL DPW series serial probes are devices used for monitoring temperature and humidity in air-conditioning, refrigeration, heating, and air handling systems.

They can be connected to controllers that have a serial connection, and come in wall-mounted, industrial, and duct versions.

They use a RS485 serial connection, which allows for cost savings in installation and simplifies connections by allowing multiple probes to be connected to the same channel.

The probes come in various models that differ based on the combination of temperature and humidity sensors and whether or not they have optical isolation of the RS485 connection.

Some models also include a function for calculating dewpoint. The precision of temperature and humidity measurement is higher compared to probes with voltage or current output because it eliminates the need for signal conversion and analogue measurement by controllers.

Customers Also Bought