SKU
D6250W

D6250W - Belimo 2-way Butterfly Valve, DN 250, Wafer Type, PN6, KVS 1300

£970.20 £808.50
On request
Next Supplier Stock Update: 18/04/2026
Free delivery over £30
Manuals & Datasheets
 DATA-SHEET 
DATASHEET
 
Product typeWater Valve
ManufacturerBelimo
Flow pattern2-Way
Valve typeButterfly Valve
Valve connectionFlanged
DN (mm)DN 250
Temperature range-20°C to +120°C

All Valves made by Belimo that are in stock with iacs are shipped for free or within 1-2 days.

The Belimo D6250W is a Valve used as a control or shutdown Valve in heating, ventilation, and air conditioning systems.

The Pressure Nominal of this Belimo control Valve is .

It is a Butterfly Valve with a Diameter Nominal of DN 250.

IACS can help you get the best-priced Belimo Butterfly Valve for your system.

If you have any queries concerning size or installation, please refer to the Belimo custom datasheet above or contact iacs by email.

Features

  • Mode of operation The butterfly valve is opened or closed completely by an open/close rotary actuator. Continuous rotary actuators are connected by a commercially available controller and move the valve to any position desired. The valve disk made of stainless steel is pressed into the soft-sealing EPDM seat by a rotary movement and ensures leakage rate A (tight). The pressure losses are slight in the open position and the kv value is at a maximum.
  • Manual overrideManual throttling or isolation can be carried out with a worm gear. The worm gear with position indication is steplessly adjustable (self-locking).

    •    Fluid Cold and warm water, water with max 50% volume of glycol
    •    Fluid temperature –20°C ... +120°C
    •    Permissible operating pressure ps 1600 kPa
    •    Leakage rate tight, leakage rate A (EN 12266-1)
    •    Angle of rotation 90°
    •    Installation position upright to horizontal (in relation to the stem)
    •    Servicing Maintenance-free
    •    Housing EN-GJS-400-15 (GGG 40), polyester-powder coating
    •    Closing element stainless steel (1.4308)
    •    Stem stainless steel AISI 420 (1.4021)
    •    Stem seal EPDM O-ring
    •    Stem bearing Bronze, steel, PTFE