AX-RM2T2 - Axio Dual Relay Module with timer 0 to 240 secs

AX-RM2T - Dual Relay Module with timer 0 to 30 secs Features:

• 0-10Volt dc input
• Adjustable Timer Range
• 2 SPCO relay outputs
• LED indication of relay status
• Auto/Hand/Off override
• DIN rail carrier as standard (TS35 DIN rail)
• Raise/Lower, High/Low, Binary and Timer functions
• High quality rising clamp terminals

AX-RM2T2 - Dual Relay Module with timer 0 to 240 secs :

The Axio AX-RM2T converts a 0-10Vdc control signal into 2 relay outputs. The module has 4 selectable modes: Raise/Lower, High/Low or Binary with or without stage delays, or as a timer module. The AX-RM2T is powered by 24Vac or 24Vdc. Jumpers for Auto/Hand/Off are provided to aid commissioning. Two LEDs indicate the individual relay states. The module is supplied in a DIN rail carrier for mounting on TS35 section DIN rail and features high quality rising clamp terminals for ease of connection..

• Input signals: Control: 0-10Vdc at 1mA maximum
• Output contacts: 2 SPCO relays. NO contact 12A, NC contact 3A, 250Vac resistive load
• Power supply: 24Vac ±10% at 95mA maximum; 24Vdc ±10% at 45mA maximum
• Modes of operation Raise/Lower, High/Low, Binary and Timer
• Manual override Auto / Hand (On) / Off
• LED indicators On when relay energised
• Timer AX-RM2T:- 0-30 seconds per stage; AX-RM2T/2:- 0-240 seconds per stage
• Terminals Rising clamp for 0.5-2.5mm² cable
• Ambient temperature range 0°C to 50°C
• Dimensions / Weight 46(W) x 82(H) x 43(D) mm / 75 gms
• Country of origin United Kingdom