AX-PCM120i - Axio Single Channel 120VA Phase Cut Module

AX-PCM120i - Single Channel 120VA Phase Cut Module Features:

• 120VA 0-20V Phase-Cut Output
• 0-10V control signal input
• Fully opto-isolated
• DIN rail carrier as standard (TS35 DIN rail)
• High quality rising clamp terminals
• Integral heatsink

AX-PCM120i - Single Channel 120VA Phase Cut Module :

The Axio AX-PCM120i converts a single 0-10Vdc control input signal to a 0-20V, 50Hz phase-cut output, at up to 120VA. The control circuit of the module is powered from 24Vac or 24Vdc (with a common connection to the input signal). A separate input connection is provided for the 24Vac phase-cut load supply. The AX-PCM120i features full opto- isolation of the control signal from the output circuit, to ensure that no grounding conflicts can occur.

• Control Supply Input 24Vac/dc ( ±15%), at 25mA maximum
• Control Input Supply 0-10Vdc (47k Ω load impedance)
• Phase-Cut Load Supply Input 24Vac, 50Hz rated to drive the load (120VA maximum)
• Phase-Cut Load Signal 0-20V full wave rectified 50Hz phase-cut at 120VA maximum
• LED Indicator Provides indication of unit operation (see section on page 2)
• Terminals: Rising Clamp for 0.5-2.5mm² Cable
• Ambient Temp. Range: 0 to 40°C
• Dimensions 125(W) x 85(H) x 78(D)mm
• Weight: 300gms
• Country of Origin: United Kingdom